ExTOPE App Help

The  ExTOPE Connect app enables X-MET and Vulcan operators to share data with colleagues, customers etc. seconds after readings are acquired.

Using your Phone’s mobile hotspot

Configuring your Phone:

1. Go to Phone Settings / Mobile Hotspot, and turn On
2. Go to Personal Hotspot, and write down the Wi-Fi password
3. Turn Hotspot On

Configuring your X-MET/Vulcan:

1. Switch the X-MET/Vulcan on
2. Select Wireless / WiFi from X-MET/Vulcan settings and turn On
3. Select your Phone’s network and enter the password you wrote down earlier
4. Press Done. The screen should show that the X-MET/Vulcan is connected to your Phone

Using your Wi-Fi network

Configuring your Phone:

1. Go to Settings / Wi-Fi, and select your Wi-Fi network (enter password if needed)

Configuring your X-MET/Vulcan:

1. Switch the X-MET/Vulcan on
2. Select Wireless / Wi-Fi and turn On
3. Select the same Wi-Fi network as the one used for your phone and enter the password if needed
4. Press Done. The screen should show that the X-MET/Vulcan is connected to the Wi-Fi network.
5. Write down the IP address
6. Press Done twice to go back to the main menu

Using the app

1. Ensure that both your X-MET/Vulcan and phone are connected to the same Wi-Fi or mobile hotspot
2. On your phone, open the ExTOPE Connect app
3. Tap “Connect to device”
4. The connection to your X-MET/Vulcan should be listed
5. If not, press the + icon and enter the IP address (as written down previously). The X-MET’s/Vulcan’s  name, serial number and IP address should now be shown
6. Select it. Results should start to be listed on your phone’s screen. Note: The results will only be visible on your phone while it is connected to the X-MET/Vulcan.
7. You can select a result and take a picture with your phone of the sample/lot/etc associated with the result 'camera icon'. The picture will be displayed with the results.
8. Using 'share icon', you can share a selected result by e-mail, Dropbox, WhatsApp, etc .